Posted on by

ISM, ISMe, and QSM11 – 011-043   Aftertreatment Adapter Pipe

Table of Contents

Remove

Remove

 TOC

Remove the V-band clamp between the exhaust adapter pipe and the turbocharger.

Remove the V-band clamp between the exhaust adapter pipe and the OEM exhaust down-pipe.

Remove the adapter pipe assembly from engine.

Remove the gasket from each end and discard. Do not use a screwdriver or other sharp tool to remove the gaskets. This will damage the gasket seating area.

Remove the aftertreatment injector from the adapter pipe. Refer to Procedure 011-042 in Section 11.

SMALL | MEDIUM | LARGE
Last Modified:  28-Jun-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.