Posted on by

ISM, ISMe, and QSM11 – 003-011   Rocker Lever Cover

Table of Contents

Install

Install

 TOC

If the gasket was not damaged, it can be used again. If the gasket was damaged, it must be discarded and a new one used.

Install the gasket on the cover.

SMALL | MEDIUM | LARGE


Install the cover on the rocker lever housing.

Install the 16 isolators, spacers, and capscrews in the cover.

SMALL | MEDIUM | LARGE
   


Tighten the capscrews in the sequence shown.

Torque Value:  15  n.m  [130 in-lb]

SMALL | MEDIUM | LARGE
   


Install the hose on the crankcase breather.

Install the air piping to the intake manifold. Refer to the manufacturer’s specifications for the correct torque values.

SMALL | MEDIUM | LARGE
Last Modified:  05-Jan-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.