ISM, ISMe, and QSM11 – 010-116   Turbocharger Control Shutoff Valve Filter Head Mounting Bracket

Preparatory Steps

TOC

 WARNING 

Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury.
 WARNING 

Air pressure must be released from the system before removing the turbocharger control shutoff valve. The turbocharger control shutoff valve is under pressure and can cause personal injury.

Remove or disconnect the following:

  • Turbocharger control shutoff valve filter head. Refer to Procedure 010-115.

SMALL | MEDIUM | LARGE

Remove

TOC

Remove the turbocharger control shutoff valve filter head mounting bracket.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

TOC

Check turbocharger control shutoff valve filter head mounting bracket for signs of damage.

SMALL | MEDIUM | LARGE
   

Install

TOC

Install the turbocharger control shutoff valve filter head mounting bracket.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
   

Finishing Steps

TOC

Install the turbocharger control shutoff valve filter head. Refer to Procedure 010-115.

Start and run engine. Check for fault codes and air leaks.

SMALL | MEDIUM | LARGE
Last Modified:  13-Oct-2005