Posted on by

ISM, ISMe, and QSM11 – 010-118   Turbocharger Actuator Air Line

Table of Contents

Remove

Remove

 TOC

Disconnect the air line from turbocharger control valve.

Use masking tape to tape the end of the air line and turbocharger control valve to prevent contamination.

Remove the turbocharger control valve air line.

SMALL | MEDIUM | LARGE


 CAUTION 

The turbocharger control valve is very sensitive to contamination. Failure to prevent contamination from entering the turbocharger control valve air lines will cause damage to the turbocharger control valve.

Disconnect the air line at turbocharger actuator.

Use masking tape to tape the end of air line and turbocharger actuator to prevent contamination.

SMALL | MEDIUM | LARGE
   


Remove the P-clip at the rear of the turbocharger bearing housing.

SMALL | MEDIUM | LARGE
Last Modified:  13-Oct-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.