ISBe/ISB Series Engines – Intake Manifold Air Temperature Above Specification

View Related Topic


Symptom Tree  

Fan drive belt or water pump belt is broken

Check the fan drive belt and water pump belt. Replace the belts if necessary. Refer to Section 6.

 

Cold weather radiator cover or winterfront is closed

Open the cold weather radiator cover or the winterfront. Maintain a minimum of 387 cm2 [60 in2] of opening at all times. Refer to Section 1.

 

Radiator shutters are notopening completely, or the shutterstat setting is wrong

Inspect the radiator shutters. Repair or replace if necessary. Check the shutterstat setting. Refer to the manufacturer’s instructions.

 

Charge air cooler fins, radiator fins, or air conditioner condenser fins are damaged or obstructed with debris

Inspect the charge air cooler, air conditioner condenser, and radiator fins. Clean, if necessary. Refer to Section 4.

 

Intake manifold temperature gauge is malfunctioning, if equipped

Test the temperature gauge. Refer to the OEM service manual.

 

Fan shroud is damaged or missing, or the air recirculation baffles are damaged or missing

Inspect the shroud and the recirculation baffles. Repair, replace, or install, if necessary. Refer to the OEM service manual.

 

Vehicle speed is too low for adequate cooling with high engine load

Reduce the engine load. Increase the engine (fan) rpm by downshifting.

 
Contact a Cummins Authorized Repair Facility
Last Modified:  22-May-2002