Posted on by

CM850 Electronic Control System – 019-059   Intake Manifold Air Temperature Sensor

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

Disconnect the wiring harness connector from the sensor.

Remove the intake manifold air temperature sensor from the intake manifold cover.

SMALL | MEDIUM | LARGE

Inspect for Reuse

 TOC

Use the electronic service tool to monitor the air temperature sensor.

Perform a rationale check to see if the sensor is reading an appropriate reading.

  
SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the sensor and tighten the capscrew.

Torque Value:  23  n.m  [17 ft-lb]

Connect the wiring harness connector to the sensor.

Turn the keyswitch ON.

Use the electronic service tool to monitor the temperature sensor to make sure it is working correctly.

Refer to the resistance charts on the wiring diagram for sensor resistance values.

SMALL | MEDIUM | LARGE
Last Modified:  13-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.