CM850 Electronic Control System – 019-159   Intake Manifold Pressure/Temperature Sensor

Table of Contents

Remove
Inspect for Reuse
Install

Remove

TOC

Lift up on the locking tab and pull the electrical connectors apart.

SMALL | MEDIUM | LARGE


Remove the sensor from the engine.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

TOC

Inspect the engine harness connector and the intake manifold pressure/temperature sensor for the following:

  1. Cracked or broken connector shell
  2. Missing or damaged connector seals
  3. Dirt, debris, or moisture in or on the connector pins
  4. Corroded, bent, broken, pushed back, or expanded pins.

SMALL | MEDIUM | LARGE
   


Inspect the intake manifold pressure/temperature sensor for the following:

  1. Swollen o-ring
  2. Nicks or cuts in or on the o-ring.

SMALL | MEDIUM | LARGE
   

Install

TOC

Make sure the new sensor has an o-ring.

Install the new sensor into the engine. Tighten the sensor.

Torque Value:  6  n.m  [53 in-lb]

SMALL | MEDIUM | LARGE
   


Push the connectors together until they lock. An audible click will be heard as the connector locks in place.

SMALL | MEDIUM | LARGE
Last Modified:  14-Apr-2005