ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 003-999   Rocker Levers – Overview

Table of Contents

General Information

General Information


A rocker housing spacer is required on the engines covered by this manual to accommodate a pass-through location for the injector wiring harness. The rocker housing utilizes a press-in-place gasket to form a seal with the cylinder head. The valve cover is mounted to the rocker housing by capscrews, isolators, and a press-in-place gasket.

Last Modified:  05-Oct-2006