ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 010-022   Air Inlet Connection

NOTE: Brush away all loose dirt from around the area of the air handling connections to avoid contamination of the interior of the engine.

• Remove the air crossover pipe that is attached to the intake connection. Refer to Procedure 010-019 in Section 10.

Remove the v-band clamp, air inlet connection and seat.

Inspect the air inlet connection and seal for cuts, cracks, holes, or worn sections.

Replace if necessary.

Install the seal, air inlet connection and v-band clamp.

Tighten v-band clamp.

• Install the air crossover pipe that is attached to the connection. Refer to Procedure 010-019 in Section 10.
• Operate the engine and check for leaks.