Posted on by

ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 011-039   Exhaust Gas Pressure Sensor

View Related Topic

Table of Contents

Remove
Install

Remove

 TOC

Push down on the locking tab and pull the connector apart.

Disconnect the hose from the inlet fitting.

Remove the sensor from the mounting location. Refer to the vehicle manufacturer’s service manual.

SMALL | MEDIUM | LARGE

Install

 TOC

Push the connectors together until they lock.

Connect the hose to the inlet fitting.

Connect the sensor to the exhaust gas treatment monitor unit harness.

Attach the sensor to the mounting location. Refer to the vehicle manufacturer’s service manual.

Reset the exhaust gas treatment monitor unit. Refer to Procedure 011-035.

SMALL | MEDIUM | LARGE
Last Modified:  03-Feb-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.