Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 002-001   Crosshead

Table of Contents

Remove

Remove

 TOC

Remove the crossheads. Make sure to mark them appropriately so they can be installed in the same location and orientation during the installation procedure.

NOTE: Excessive crosshead wear can result if the crossheads are not installed in their original locations. The larger hole on the underside of the crosshead must be oriented toward the exhaust side of the engine.

SMALL | MEDIUM | LARGE
Last Modified:  03-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.