Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 003-009   Rocker Lever Assembly

Table of Contents

Remove

Remove

 TOC

Loosen the valve and injector adjusting screw lock nuts on each rocker lever.

Turn the adjusting screws

counterclockwise
until the rocker levers are loose.

 CAUTION 

Do not attempt to remove or install the rocker lever shaft assemblies without resetting the lash.
 
SMALL | MEDIUM | LARGE


Remove the rocker lever shaft capscrews and the rocker lever shaft assemblies.

NOTE: To prevent increased wear, mark each rocker lever as it is removed so it can be installed back in its original location.

SMALL | MEDIUM | LARGE
   


Remove the rocker levers from the shaft.

Remove the lock nuts and the adjusting screws from the rocker lever.

NOTE: To prevent increased wear, mark each adjusting screw as it is removed so it can be installed back in its original rocker lever.

SMALL | MEDIUM | LARGE
Last Modified:  20-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.