Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 003-011   Rocker Lever Cover

Table of Contents

Install

Install

 TOC

NOTE: The rocker lever cover gaskets are reusable. Do not replace the gaskets unless they are damaged.

Install the rocker lever cover gasket onto each rocker lever housing. The tabs at each end must point down toward the rocker lever housing.

SMALL | MEDIUM | LARGE


Install the rocker lever covers on the rocker lever housings.

Install the ten capscrews and washers in each rocker lever cover.

SMALL | MEDIUM | LARGE
   


Tighten the capscrews in each rocker lever cover in the sequence illustrated.

Torque Value:  12  n.m  [106 in-lb]

SMALL | MEDIUM | LARGE
   


Install the crankcase breather tube, if used, and the oil filler cap. Refer to Procedure 003-001 in Section 3.

Install the hose on the crankcase breather.

Tighten the hose clamp.

Torque Value:  5  n.m  [44 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  20-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.