Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 010-023   Air Intake Manifold

Table of Contents

Install

Install

 TOC

Use new gasket(s) and install the intake manifold onto the cylinder head mounting surfaces.

Install and tighten the nine capscrews.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE


Install the compressor supply air line from the air compressor to the intake manifold.

SMALL | MEDIUM | LARGE
   


Install the intake air connector and tighten the four capscrews.

Install the intake air piping from the charge-air cooler to the air inlet connection on the intake manifold and tighten the clamp.

Torque Value:

Connection

  1. 34 n.m   
    [25 ft-lb]
Torque Value:

Clamp

  1. 8.5 n.m   
    [75 in-lb]

SMALL | MEDIUM | LARGE
   


Install all Compuchek® sensors.

Install the intake manifold temperature and pressure sensors.

Torque Value:

Intake Manifold Temperature Sensor

  1. 34 n.m   
    [25 ft-lb]
Torque Value:

Intake Manifold Pressure Sensor

  1. 30 n.m   
    [22 ft-lb]
Torque Value:

Intake Manifold Compuchek® Sensor (Pressure)

  1. 14 n.m   
    [124 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  20-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.