Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 007-040   Lubricating Oil Transfer Tube

Table of Contents

Install

Install

 TOC

Install a new rectangular sealing ring into the lubricating oil pump mounting flange.

Use clean vegetable oil to lubricate the seal.

SMALL | MEDIUM | LARGE


Install a new o-ring onto the oil pan lubricating oil suction tube.

Use clean vegetable oil to lubricate the o-ring.

SMALL | MEDIUM | LARGE
   


Loosely install the lubricating oil transfer tube assembly with the lubricating oil pump mounting flange, new sealing ring, new gasket, and the mounting capscrews to the oil pan and lubricating oil pump.

NOTE: The printed side of the mounting flange gasket on the oil transfer tube

must
be toward the flange.

SMALL | MEDIUM | LARGE
   


Tighten the capscrews in the following sequence:

  • First, tighten the two capscrews (1) at the oil pan.
  • Second, tighten the capscrews (2) at the lubricating oil pump.
Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  19-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.