Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 019-038   Engine Position Sensor (EPS)

Table of Contents

Install

Install

 TOC

Install a new o-ring onto the engine position sensor.

Install the new sensor into the mounting hole in the cylinder block (gear housing on M11 engines).

Tighten the EPS with the installation tool, Part Number 3822747.

Torque Value:  20  n.m  [177 ft-lb]

SMALL | MEDIUM | LARGE


Connect the sensor to the engine harness. Push the connectors together until they lock.

  
SMALL | MEDIUM | LARGE
Last Modified:  02-Jan-2012
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.