Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 009-004   Accessory Drive Pulley

Table of Contents

Remove

Remove

 TOC

Remove the freon compressor drive belt, if equipped. Refer to the OEM service manual.

Remove the pulley retaining nut.

SMALL | MEDIUM | LARGE


 CAUTION 

The gear cover will be damaged if the puller capscrews extend beyond the rear face of the accessory drive pulley.

Use a standard puller, Part Number ST-647, to remove the pulley.

SMALL | MEDIUM | LARGE
   


Remove the dust seal from the back of the pulley. Inspect the dust seal for wear or other damage. Replace if necessary.

SMALL | MEDIUM | LARGE
Last Modified:  15-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.