Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 016-006   Flywheel Housing

Table of Contents

Remove

Remove

 TOC

Remove capscrews (1) and (2), and install two 3/8-18 x 4-inch guide studs, Part Number 3824462.

SMALL | MEDIUM | LARGE


Remove the remaining capscrews.

Use a rubber hammer to loosen the housing from the dowels in the cylinder block.

SMALL | MEDIUM | LARGE
   


On wet-type flywheel housings, remove the o-ring from the rear cover and the eleven rectangular sealing rings from the flywheel housing.

SMALL | MEDIUM | LARGE
Last Modified:  13-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.