1. Install the flywheel to the crankshaft Notice: Refer to Fastener Notice in Caution and Notices.
2. Install the flywheel mounting bolts.
Tighten
Tighten the bolts to 90 N-m (65 Ib ft).
3. Install the clutch assembly if equipped. Refer to Clutch Assembly Replacement in Clutch.
4. Install the transmission from the vehicle.
• For the 4L 80-E automatic transmission, refer to Transmission Replacement in Transmission/Transaxle.
• For the NV 4500 manual transmission, refer to Transmission Replacement in Transmission/Transaxle.
5. Install the transfer case (if equipped).
• F or the BW 44 0 1 , BW 4470, and the NVG 241 -NP2 transfer cases, refer to Transfer Case Replacement in Driveline/Axle.
• For the NVG 243-NP 1 transfer case, refer to Transfer Case Replacement in Driveline/Axle.
• For the NVG 246 -NP 8 transfer case, refer to Transfer Case Replacement in Driveline/Axle.
6. Connect both the battery negative cable to the batteries. Refer to Battery Cable in Engine Electrical.
