1 . Apply the silicone sealant GMP/N 9985943, or equivalent to the turbo charger outlet.
2 . Install the EGR tower gasket on the round center portion of the intake manifold.
3. Install the intake manifold gasket.
4. Slide the intake in to the turbo charger outlet hose.
5. Install the intake manifold.
6. Install the EGR gasket and valve.
Notice : Refer to Fastener Notice in Caution sand Notices.
7. Install the intake manifold bolts.
Tighten
Tighten the bolts to 23 N-m (17 Ib ft).
8. Install the clamp for the turbo charger connector hose.
Tighten
Tighten the connector hose clamps to 6 N-m ( 50 Ib in ).
