Drive Units Tool Number 3823774 Needle Bearing Kit Used to remove and install needle bearings in the hydraulic pump adapter. Use mandrel, Part Number 3823776,…

Table of Contents General Information Initial Check Remove Install General Information TOC This procedure applies to engines using an electric fan clutch controlled by the…

Table of Contents General Information General Information TOC The coolant flow that provides torque converter cooling is achieved in different manners. M Series engines use…

Table of Contents Preparatory Steps   With EGR Without EGR Remove   With EGR Without EGR Clean and Inspect for Reuse   With EGR Without…

Table of Contents Preparatory Steps Remove Disassemble Clean and Inspect for Reuse Assemble Install Finishing Steps Preparatory Steps TOC  WARNING  Coolant is toxic. Keep away…

View Related Topic Table of Contents Preparatory Steps Remove Disassemble Leak Test Assemble Install Finishing Steps Preparatory Steps TOC  WARNING  Do not remove the pressure…

Table of Contents Initial Check Initial Check TOC Check the shutters in the closed position to be sure they are completely closed. If the shutters…

Table of Contents Inspect for Reuse Inspect for Reuse TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until the coolant…

Table of Contents Maintenance Check Maintenance Check TOC Check all hoses for cracks, cuts, or collapsing. NOTE: The silicone engine coolant hose will exhibit swelling due…

Table of Contents Initial Check Initial Check TOC  WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause…