Table of Contents Leak Test Leak Test TOC This procedure outlines the steps to isolate a centrifugal bypass filter when checking possible causes of high…

Table of Contents Remove Clean and Inspect for Reuse Install Remove TOC Remove the four capscrews and the housing. SMALL | MEDIUM | LARGE Next Clean and Inspect for…

Table of Contents Calibrate Calibrate TOC NOTE: This procedure must begin with the oil pan drained. Install the dipstick in the dipstick tube housing. Use the…

Table of Contents Preparatory Steps   With EGR Without EGR Remove Clean Pressure Test Install Finishing Steps   With EGR Without EGR Preparatory Steps TOC…

Lubricating Oil System Tool Number 3397929 Oil Filter Wrench Used to remove and install the lubricating oil filters. Tool Number 3375182 Spring Compression Tester Measures…

Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC  WARNING  Batteries can emit explosive gases. To avoid personal injury, always ventilate the…

Table of Contents Setup Measure Setup TOC Remove the rocker lever cover. Refer to Procedure 003-011 in Section 3. Remove the injector from cylinder number…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fuel line or fuel hose. SMALL | MEDIUM | LARGE Next Inspect for Reuse TOC Inspect the…

Table of Contents Measure Measure TOC Remove the fuel supply hose to the gear pump, and install the manometer, Part Number ST-1111-3. Use the appropriate…

Table of Contents Remove Install Remove TOC Clean the area around the fuel filter and fuel filter head. Remove the fuel filter with filter wrench,…