Table of Contents Remove Remove TOC Raise the cam follower assemblies, and use a wire to tie the cam followers up away from the camshaft.…
Table of Contents Remove Remove TOC Remove the gear cover. Refer to Procedure 001-031. SMALL | MEDIUM | LARGE Next Remove the camshaft idler gear. Refer to Procedure 001-036.…
Table of Contents Remove Remove TOC CAUTION Support the camshaft gear on the center hub when pressing it off the camshaft. Failure to do so…
Table of Contents Remove Remove TOC CAUTION Do not pry on the gear or pump flange. This can result in damage to the pump. Remove…
Table of Contents Remove Remove TOC Remove the two mounting capscrews and the hydraulic pump, if equipped, or the cover plate. SMALL | MEDIUM | LARGE Next Remove the…
Table of Contents Remove Remove TOC Remove the six capscrews and the accessory drive assembly. SMALL | MEDIUM | LARGE Last Modified: 23-Jan-2009 Feedback / Help
Table of Contents Remove Remove TOC Before removing the idler gear, use the accessory driveshaft to rotate the crankshaft until the timing marks on the…
Table of Contents Remove Remove TOC Three idler gear assemblies are used: Water pump idler gear (1) Camshaft idler gear (2) Hydraulic pump idler gear…
Table of Contents Remove Remove TOC Three idler gear assemblies are used: Water pump idler gear (1) Camshaft idler gear (2) Hydraulic pump idler gear…
Table of Contents Remove Remove TOC Remove the nuts and washers from the cam follower assembly supports. SMALL | MEDIUM | LARGE Next Install the cam follower assembly installation…