View Related Topic Table of Contents Install Install TOC Apply a 1.97 mm [1/8 in] bead of silicon sealant, Part Number 3164067, to each of…

Table of Contents Install Install TOC Lubricate the o-ring with clean 15W-40 engine oil. Install the new o-ring on the oil suction tube. SMALL | MEDIUM | LARGE Next…

Table of Contents Install Install TOC Install the block stiffener plate and the 10 capscrews. Tighten the capscrews. Torque Value:  137  n.m  [102 ft-lb] SMALL | MEDIUM | LARGE Last Modified:  08-Apr-2005 Feedback /…

Table of Contents Install Install TOC  CAUTION  Properly align the nozzles in the locator notch before tightening the capscrews. Damage to the engine can occur.…

Table of Contents Install Install TOC Immerse the piston in a container of clean 15W-40 oil. Remove the piston from the container. Let the excess…

View Related Topic Table of Contents Install Install TOC  CAUTION  Connecting rod bearings must match the connecting rod design. Drilled rods must use drilled rod…

Table of Contents Install   Articulated Piston Single-Piece Piston Install TOC Articulated Piston  CAUTION  Use a copper or aluminum vise protector when installing the connecting…

View Related Topic Table of Contents Install Install TOC Install the pilot bearing spacer into the rear of the crankshaft with the spacer lip oriented…

Table of Contents Install Measure Install TOC The rear crankshaft seal must be oriented with the engine as shown in the illustration. SMALL | MEDIUM | LARGE Next  CAUTION …

View Related Topic Table of Contents Install Measure   Bore Alignment Face Alignment Install TOC Remove the protective plug from the block oil passages. Make…