View Related Topic Table of Contents Install Measure   Bore Alignment Face Alignment Install TOC Remove the protective plug from the block oil passages. Make…

View Related Topic Table of Contents Install Install TOC Remove the protective plug from the cylinder block oil passage. Make sure no debris enters the…

Table of Contents Install Install TOC Align dowels on oil pump with mounting holes in the cylinder block. Install the oil pump, shims (if they…

Table of Contents Install Install TOC  WARNING  This component or assembly weighs greater than 23 kg [50 lb]. To prevent serious personal injury, be sure…

Table of Contents Install Install TOC Use Lubriplate™ 105, or equivalent, to coat the upper thrust bearings. SMALL | MEDIUM | LARGE Next Push the crankshaft toward the rear…

View Related Topic Table of Contents Install Install TOC  CAUTION  The cylinder block saddle and the cap mating surfaces must be clean and dry when…

Table of Contents Install Measure   Liner Protrusion Install TOC  CAUTION  Cylinder liners of different design can not be mixed within an engine. All six…

Table of Contents Remove Remove TOC The cylinder liners can be removed by using either: Cylinder liner puller (universal), Part Number 3163745, and puller plate…

View Related Topic Table of Contents Remove Remove TOC  CAUTION  Mark any unmarked bearing caps before removing them from the cylinder block. Do not remove…

Table of Contents Remove Remove TOC Remove the thrust bearings from the number four main bearing cap. Mark the thrust bearings as being lower, and…