Table of Contents Preparatory Steps Remove Clean Inspect for Reuse Install Preparatory Steps TOC Remove the turbocharger. Refer to Procedure 010-033-002.   SMALL | MEDIUM | LARGE Next Remove…

Exhaust System Tool Number ST1273 Pressure Gauge [0 to 75 in Hg] Used to measure the intake manifold pressure and exhaust back pressure. Last Modified:  03-Apr-2002…

Table of Contents Inspect for Reuse Inspect for Reuse TOC Inspect the lever pin. Replace the turbine housing assembly if worn excessively. Refer to the…

Table of Contents Remove Inspect for Reuse Test Install Calibrate Remove TOC NOTE: The turbocharger must be removed to perform the following maintenance checks.   SMALL | MEDIUM | LARGE…

Table of Contents Leak Test Leak Test TOC Fluorescent Tracer, Part No. 3376891 Add 1 unit of fluorescent tracer, Part No. 3376891, to engine lubricating…

Table of Contents Measure Measure TOC Remove the intake and exhaust pipes from the turbocharger. SMALL | MEDIUM | LARGE Next Use a narrow blade or a wire-type feeler…

Table of Contents Initial Check Remove Inspect for Reuse Install Initial Check TOC Inspect the line for oil leaks or damage. Replace as necessary. SMALL | MEDIUM | LARGE…

Table of Contents Leak Test Leak Test TOC Remove the air intake and charge air cooler (CAC) piping from the turbocharger. SMALL | MEDIUM | LARGE Next Inspect the…

Table of Contents Inspect for Reuse Inspect for Reuse TOC Remove the intake pipe from the turbocharger. Inspect the turbocharger compressor impeller blades for damage.…

Table of Contents Measure Measure TOC Dial Depth Gauge, Part No. ST-537 Measure the shaft end play. Turbocharger Shaft End Play mm in For turbochargers…