Table of Contents General Information Remove Install General Information TOC Belt drive systems equipped with an automatic belt tensioner can not be adjusted. A belt…

Table of Contents General Information General Information TOC The air starting motor system (tanks, line sizes, and valves) is designed and installed by the OEM…

Table of Contents Inspect Inspect TOC  CAUTION  The silicone fluid in the vibration damper will become solid after extended service and will make the damper…

Table of Contents Maintenance Check Maintenance Check TOC Measure the drive pulley flange end clearance at the correct maintenance interval in Section 2. Remove the…

Table of Contents Initial Check Initial Check TOC Remove the fan drive belt. Refer to Procedure 008-002 (Drive Belt, Cooling Fan) in Section A. Inspect…

Table of Contents Drain Clean Fill Drain TOC Position the vehicle on level ground.   SMALL | MEDIUM | LARGE Next  WARNING  Check the coolant level only when the…

Table of Contents General Information Maintenance Check General Information TOC All air compressors have a small amount of lubricating oil carryover that lubricates the piston…

Table of Contents Maintenance Check Maintenance Check TOC Check the water pump body for indications of water leakage at the weep hole. Reference the appropriate…

Table of Contents Adjust   General Information CELECT™ or CELECT™ Plus With Engine Brakes Adjust TOC General Information Valves, injectors, and engine brakes must be…

Table of Contents Maintenance Check Maintenance Check TOC Check the turbocharger mounting nuts. Reference the appropriate engine application for the maintenance interval. Tighten the mounting…