Table of Contents Remove Remove TOC Remove the upper radiator hose from the thermostat housing and disconnect the air compressor coolant return line from the…

Table of Contents Remove Remove TOC Remove the coolant temperature sensor from the thermostat housing. SMALL | MEDIUM | LARGE Last Modified:  03-Oct-2011 Feedback / Help

Table of Contents Remove Remove TOC Remove the fan drive belts. Refer to Procedure 008-002 in Section 8. SMALL | MEDIUM | LARGE Next Loosen the idler pulley shaft…

Table of Contents Remove Remove TOC NOTE: Optional two capscrew or four capscrew designs are available. Remove the capscrews and the fan hub. SMALL | MEDIUM | LARGE Last Modified:  14-Sep-2011…

Table of Contents Remove Remove TOC Loosen the capscrews which secure the fan hub shaft to the bracket. NOTE: Both two capscrew and four capscrew designs…

Table of Contents Remove Remove TOC The following procedure is without removing the rear cover plate: Drill one or more holes into the rear crankshaft…

Table of Contents Remove Remove TOC Remove capscrews (1) and (2), and install two 3/8-18 x 4-inch guide studs, Part Number 3824462. SMALL | MEDIUM | LARGE Next Remove…

Table of Contents Remove Remove TOC Install two 1/2 – 13 x 1 1/2 puller capscrews which have a minimum of 1 1/4-inch threaded area…

Table of Contents Remove Remove TOC Remove the piston cooling nozzles. Remove and discard the o-rings. SMALL | MEDIUM | LARGE Last Modified:  12-Sep-2011 Feedback / Help

Table of Contents Remove Remove TOC Remove the four capscrews and housing. SMALL | MEDIUM | LARGE Last Modified:  12-Sep-2011 Feedback / Help