No tooling is allowed for disconnecting or connecting the quick-release coupling. New situation 1. Lubricate the O-ring with the specified mounting product. – Always use…
1. Fit the union nut (5) onto the fuel dosing module (4), and tighten it to the specified torque. 2. Position the clip, and tighten…
Table of Contents General Information General Information TOC A thorough analysis of the customer’s complaint is the key to successful troubleshooting. The more information known…
Table of Contents General Information General Information TOC For the installation and adjustment of the Jacobs® Engine Brake, Models 440 (STC engines) and 445 (CELECT™…
Table of Contents General Information General Information TOC The mounting adaptations group consists of the flywheel housing, flywheel, flywheel ring gear, pilot bearing, and the…
Table of Contents General Information In Service Run-in Engine Dynamometer Run-in Cummins Heavy Duty Engine Operating Curve Definitions Run-In Instructions Fuel Flow Measurement on…
Table of Contents General Information General Information TOC The basic heavy-duty electrical system consists of: Batteries and cables (1) A starting motor (2) An alternator…
1. Install the gaskets onto the connection pipe (1) and slot (2). Always use new gaskets and apply the specified mounting agent. 2. Position the…