1. Remove the heat shield. 2. Remove the bolt (1). 3. Loosen the union nut (5) from the fuel dosing module (4). Pressurized fuel can…

1. Clean the oil filling pipe (4) and surrounding area. Use a clean environment and clean tools to prevent dirt from entering the crankcase over…

1. Loosen the locking pin and remove the pump unit tappets. 2. Visually inspect the pump unit lifter and the camshaft for wear and damage.…

1. Clean the area around the common rail pump unit and the exterior of the fuel tank. 2. Open the fuel tank cap to release…

1. Remove the plug (5) to access the connecting pipe with seal behind it. 2. Fit an M6 bolt in the connecting pipe with seal…

1. Remove the engine oil pump attachment bolts (5). 2. Remove the engine oil pump (6).

1. Remove the oil suction pipe attachment bolts (3). 2. Remove the oil suction pipe (2) by sliding it out of the oil pipe, suction…

1. Remove the attachment bolts (3). 2. Remove the coolant pump by maneuvering it downward and sideways. The sealing ring (8 and 12) and coolant…

1. Mount the oil cooler adapter plate for the leakage testing special tool (1742628) (C) onto the engine oil cooler (1). 2. Use the oil…

1. Remove the attachment bolts, and remove the oil module by sliding it backward. – Moving the oil module sideways damages the coolant connection pipe.…