The cylinder case has eight machined cylinder bores to support the piston/connecting rod assemblies (see Figure 2-12). The bores have different diameter sizes, with cylinders…
Table of Contents General Information General Information TOC Use the charts on the following pages of this section to aid in diagnosing specific engine symptoms.…
Fault Codes 123, 141, 145, 154, 213, 222, 352, and 422 Printable Version Overview CODE REASON EFFECT Fault Code: MultiplePID: NoneFMI: NoneLAMP: YellowSRT: 00-615 Low voltage detected on the internal…
Symptom Tree t016 Printable Version This is symptom tree t016 Cause Correction Error 5023: No connection to the ECM was established or detected Refer to Procedure…
The camshaft is made of forged steel and has sixteen lobes to operate hydraulic roller lifters for eight intake and eight exhaust valves (see Figure…
Fault Codes 352 and 431 Printable Version Overview CODE REASON EFFECT Fault Code: MultiplePID: NoneFMI: NoneLAMP: YellowSRT: 00-615 No outgoing voltage detected at the ECM switch supply pin 10 of…
The cylinder case has five bores to support the camshaft. The bores use one-piece sleeve bearings of different sizes, with bores #1 to #4 having…
The crankshaft is made of cast iron and has integral counterweights (see Figure 2-6). The main bearing and crankpin journals are machined with deep, rolled…
The cylinder case has five split bores to support the crankshaft (see Figure 2-4). Four bolts retain each bearing cap to the cylinder case. Each…
The one-piece cylinder case is made from cast iron and has the following features (refer to Figures 2-2 and 2-3): • Support for the crankshaft…