Table of Contents Preparatory Steps Remove Clean Install Preparatory Steps TOC  CAUTION  Coolant is toxic. If not reused, dispose of in accordance with local environmental…

Table of Contents General Information Maintenance Check General Information TOC Gauges and sensors are used in the system to measure the coolant temperature. These can…

Table of Contents Remove Install Remove TOC 3/8-Inch Square Drive Lift the tensioner to remove the drive belt. NOTE: The belt tensioner is spring-loaded and must…

Table of Contents Remove Inspect for Reuse Install Remove TOC 3/8-Inch Square Drive Lift the tensioner to remove the drive belt. NOTE: The belt tensioner is…

Cooling System Tool Number 3376050 Dial Indicator and Sleeve Assembly Use with magnetic base, Part No. 3377399, to measure the fan hub and clearance. Tool…

Table of Contents Inspect Inspect TOC An analysis of used oil can help diagnose internal engine damage and determine if it was caused by one…

Table of Contents Remove Inspect for Reuse Install Remove TOC Disconnect the wire from the sending unit. NOTE: The sending units illustrated can be different from…

View Related Topic Table of Contents Drain Fill Drain TOC  WARNING  To reduce the possibility of personal injury, avoid direct contact of hot oil with…

Table of Contents Preparatory Steps Remove Clean Inspect for Reuse Install Fill Preparatory Steps TOC Drain the lubricating oil. Refer to Procedure 007-025-005. Remove the…

Table of Contents Preparatory Steps Remove Inspect for Reuse Measure Install Preparatory Steps TOC Remove the drive belt. Refer to Procedure 008-002. NOTE: Removal is easier…