Table of Contents Initial Check Initial Check TOC To check for a sticking pressure regulator, install a pressure gauge on the Compuchek® fitting in the…

Table of Contents Remove Install Remove TOC Remove the linkage from the VS throttle lever. SMALL | MEDIUM | LARGE Next Remove the following parts: VS housing cover Gasket…

Table of Contents Remove Install Remove TOC Remove the locknuts and jam nuts. Discard the copper washers. SMALL | MEDIUM | LARGE Next Install TOC Install new copper washers…

Table of Contents Stall Speed Check Time Speed Check Stall Speed Check TOC Converter Transmissions Stall Speed The stall speed is the engine speed (rpm)…

Table of Contents Inspect for Reuse Inspect for Reuse TOC To start a STC engine in case of an electrical failure, turn the knob on…

Table of Contents Remove Install Remove TOC Mark the angle of the VS throttle lever on the VS throttle shaft. Remove the VS throttle lever.…

Table of Contents Adjust Adjust TOC Remove the throttle linkage from the throttle lever. Hold the VS lever counterclockwise in the idle position. Move the…

Table of Contents Adjust Adjust TOC  CAUTION  Do not make any adjustments to the throttle stop screws. If the throttle does not break over correctly,…

Table of Contents Inspect for Reuse Inspect for Reuse TOC Remove the fuel inlet connection and pulsation damper or the filter head damper assembly. Discard…

Table of Contents Adjust Adjust TOC To check the engine speed, use digital tachometer kit, Part No. 3375631, or optical tachometer, Part No. 3377462. SMALL | MEDIUM | LARGE…