View Related Topic Table of Contents Remove   CELECT™ CELECT™ Plus STC Install   CELECT™ CELECT™ Plus STC Remove TOC CELECT™ Disconnect the battery cables…

Table of Contents Setup Measure Setup TOC Remove the rocker lever cover. Refer to Procedure 003-011 (Rocker Lever Cover) in Section 3. Remove the injector…

Table of Contents Remove Inspect for Reuse Remove TOC Remove the fuel line or fuel hose. SMALL | MEDIUM | LARGE Next Inspect for Reuse TOC Inspect the inside…

Table of Contents Measure Measure TOC Remove the fuel supply hose to the gear pump and install the manometer, Part No. ST-1111-3. Use the appropriate…

Table of Contents Remove Install Remove TOC Clean the area around the fuel filter and fuel filter head. Remove the fuel filter with filter wrench,…

Table of Contents Measure Measure TOC Inspect the drain lines and make sure the lines do not have any loops and are not crimped. SMALL | MEDIUM | LARGE…

Table of Contents Remove Install Remove TOC NOTE: This procedure applies to CELECT™ and CELECT™ Plus engines only. Disconnect the engine wiring harness from the ECM.…

Table of Contents General Information Automated Cylinder Performance Test   CELECT™ or CELECT™ Plus Cylinder Cutout Test   CELECT™ or CELECT™ Plus STC Exhaust Manifold…

Table of Contents Test   Sight Glass Method Gear Pump Drain Method Test TOC Sight Glass Method Remove the fuel suction line. Install a sight…

Injectors and Fuel Lines Tool Number ST-434 Vacuum Gauge (0 to 30 in. Hg) Used to check fuel inlet restriction. Fuel restriction adapters, Part No.…