Table of Contents General Information Initial Check Preparatory Steps Remove Install Finishing Steps General Information TOC In addition to the heavy duty battery connections used…

Table of Contents Preparatory Steps Remove Clean and Inspect for Reuse Install Finishing Steps Preparatory Steps TOC Remove the alternator drive belt. Refer to Procedure…

Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC  WARNING  Batteries can emit explosive gases. To reduce the possibility of personal injury,…

Table of Contents Voltage Check Voltage Check TOC Use digital multimeter, Part Number 3377161, with the switch set to the VDC position Connect the multimeter…

Table of Contents Voltage Check Voltage Check TOC  WARNING  Be sure the starter switch is in the OFF position to prevent electrical shock. Remove the…

Table of Contents Current Check Current Check TOC  WARNING  Be sure the starter switch is in the OFF position to prevent electrical shock. Remove the…

Table of Contents Initial Check Initial Check TOC There are two possible heavy-duty battery connections: Battery terminal and clamp (1) Threaded battery terminal and nut…

Table of Contents Inspect Inspect TOC Use an inductive charging and cranking system analyzer to load-test the state of charge of maintenance-free batteries. If the…

Table of Contents Remove Install Adjust Remove TOC Insert a 3/8-inch breaker bar into the space provided on the tensioner. Rotate the tensioner away from…

Table of Contents Preparatory Remove Inspect for Reuse Disassembly Assembly Install Finishing Steps Preparatory TOC Remove the alternator drive belt. Refer to Procedure 013-005 in…