1. Clean the sealing surfaces and fit a new gasket. Always use a new gasket. 2. Install the fuel intake module (8) and tighten the…

1. Remove the packaging from the pump units. – If the pump units are reused, the O-rings must be replaced. – Install the O-rings in…

Always install new pump unit lifters if the camshaft is replaced. Never use pump unit lifters that have been dropped, are corroded, or are in…

1. Clean the gasket face of both the engine block and oil filling pipe (4). 2. Place the gasket onto the oil filling pipe (4)…

1. Fit the union nut (5) onto the fuel dosing module (4), and tighten it to the specified torque. 2. Position the clip, and tighten…

1. Install the gaskets onto the connection pipe (1) and slot (2). Always use new gaskets and apply the specified mounting agent. 2. Position the…