Before installing the turbocharger, check the following: – The turbocharger shaft must rotate freely. – The turbocharger shaft must have some radial clearance. – The…

Cylinder Head Attachment Bolts Tightening sequence, cylinder head attachment bolts – Attachment bolts may only be reused when a new nut can be screwed by…

– A torque multiplier is a tool that increases the torque. It has both a gear ratio and a torque ratio. – Make sure to…

1. Apply a drop of oil to the bearing surface of the bolt heads. 2. Place the cylinder head on the cylinder block and hand-tighten…

1. Clean the cylinder head bolt thread. 2. Apply a drop of oil on the bolt thread. 3. Check the bolts with a clean new…

1. Position the cylinder head gasket using both hands. Make sure that: – no dirt gets onto the cylinder head gasket. – the cylinder head…

Take the following measurements to determine the wear on the cylinder liners. Measuring instructions: 1. Check the condition of the combustion area of the cylinder…