Symptom Tree t010
| Cause | Correction |
|---|
|
Air system leaks |
Block the vehicle wheels and check the air system for leaks with spring brakes applied and released. Check for leaks from the air compressor gaskets and the air system hoses, fittings, tanks, and valves. Refer to Procedure 012-019. |
 |
|
Air governor is malfunctioning or not set correctly |
Check the air governor for correct operation. Make sure the air governor is located less than 0.6 m [2 ft] from the air compressor. Refer to Procedure 012-017 or 012-018. |
|
|
Air governor signal line or actuator line is plugged |
Inspect the signal line and actuator line. Refer to the manufacturer’s instructions. |
|
|
Air system component is malfunctioning |
Check the operation of check valves, alcohol evaporators, air dryers, and other OEM-installed air system components. Refer to the manufacturer’s instructions. |
|
|
Unloader valve is malfunctioning |
Check the unloader valve and unloader body seal. Refer to Procedure 012-101, 012-103, 012-104, or 012-106. Check for cracked manifold or leaking mounting gasket. |
