Posted on by

M11 Series – Service Manual – 003-002   Crankcase Breather (Internal)

Remove

 TOC

Remove the tube support bracket capscrew and bracket.

Remove the tube from the engine.

SMALL | MEDIUM | LARGE


Remove the rocker lever housing cover.

Refer to Procedure 003-011.

SMALL | MEDIUM | LARGE
   

Clean

 TOC

Use solvent to clean the cover, breather cavity, and breather tube. Dry with compressed air.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Use compressed air to blow through the breather cavity.

If the breather cavity is clogged and the restriction can

not be removed by cleaning, the cover

must be replaced.

Use air pressure to blow through the tube.

Replace the tube if it is clogged.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the rocker lever housing cover.

Refer to Procedure 003-011.

SMALL | MEDIUM | LARGE
   


Install the breather tube, bracket, and capscrew on the engine.

Tighten the bracket capscrew.

Torque Value:  27  n.m  [20 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.