Posted on by

M11 Series – Service Manual – 007-028   Lubricating Oil Pressure Gauge

Table of Contents

Test

Test

 TOC

Check the following for defects:

  • Electrical wiring broken
  • Sending unit malfunction
  • Plumbing loose or broken

SMALL | MEDIUM | LARGE


To check for a sending unit malfunction:

  • Use a Compulink™ to verify the readings of the suspect gauge.
  • If readings from the engine sensors are suspected, use a master gauge of known accuracy to verify.
  • Connect the line from the master gauge to the main oil rifle on the fuel pump side of the engine.
  • Replace the sending unit or sensor if it is defective.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.