Posted on by

M11 Series – Service Manual – 010-038   Turbocharger Axial Clearance

Table of Contents

Measure

Measure

 TOC

Use dial depth gauge, Part No. ST-537.

Push the rotor assembly away from the gauge.

Set the gauge on zero (0).

SMALL | MEDIUM | LARGE


Push the rotor assembly toward the gauge, and record the reading.

Axial Clearance
mm in
0.038 MIN 0.0015
0.089 MAX 0.0035

Replace the turbocharger if the clearance does not meet the specifications. Refer to Procedure 010-033 for the replacement procedure.

SMALL | MEDIUM | LARGE
   


Install the exhaust pipe, and tighten the clamp.

Install the intake pipe, and tighten the clamp.

Torque Value:  8  n.m  [72 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  27-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.