Posted on by

M11 Series – Service Manual – 010-039   Turbocharger Blade Damage

Table of Contents

Inspect for Reuse

Inspect for Reuse

 TOC

Remove the intake pipe from the turbocharger.

Inspect the turbocharger compressor impeller blades for damage.

Replace the turbocharger if damage is found.

Refer to Procedure 010-033.

SMALL | MEDIUM | LARGE


If the compressor impeller is damaged, inspect the intake piping and filter element for damage.

Repair any damage before operating the engine.

SMALL | MEDIUM | LARGE
   


Remove the exhaust pipe from the turbocharger.

Inspect the turbine wheel for damage.

Replace the turbocharger if damage is found.

Refer to Procedure 010-033.

SMALL | MEDIUM | LARGE
   


Install the intake pipe, and tighten the clamp.

Install the exhaust pipe, and tighten the clamp.

Torque Value:  8  n.m  [72 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.