Posted on by

M11 Series – Service Manual – 010-040   Turbocharger Compressor Seal Leaks

Table of Contents

Leak Test

Leak Test

 TOC

Remove the air intake and charge air cooler (CAC) piping from the turbocharger.

SMALL | MEDIUM | LARGE


Inspect the compressor intake and discharge for oil.

If oil is present in the compressor intake, as well as in the discharge, check upstream from the turbocharger for the source of the oil.

SMALL | MEDIUM | LARGE
   


If oil is present

only in the discharge side, install the air intake and charge air cooler piping.

Check for intake restriction.

Refer to Procedure 010-031.

If no intake restriction is found, replace the turbocharger.

Refer to Procedure 010-033.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.