M11 Series – Service Manual – 016-002   Engine Support Bracket, Front

Use a hoist or lifting fixture to support the front of the engine.

Remove the capscrews from the front engine mount.

Remove the six mounting capscrews and the front engine support.

WARNING  When using a steam cleaner, wear protective clothing, as well as safety glasses or a face shield. Hot steam can cause serious personal injury.

Use steam or solvent to clean the front engine support. Dry with compressed
air.

Inspect the support for cracks or other damage.

If the support is cracked or otherwise damaged, it must be replaced.

Apply a coating of thread sealant, Part No. 3823494, to the three capscrews
at locations 1, 2 and 3.

Install the front support and mounting capscrews.

Lower the front of the engine.

Install the front engine mount capscrews.

Tighten the capscrews to the OEM’s specifications.

Remove the lifting fixture or hoist from the front of the engine.