Centinel System – Repair Manual – 016-001   Engine Lifting Brackets

• Remove the retaining brace bracket. Refer to Procedure 001-081.

NOTE: Newer models use three mounting capscrews.

Remove the four capscrews and the rear lifting bracket.

Remove the four capscrews and the front lifting bracket.

WARNING  When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer’s recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury.

WARNING  When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury.

WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause bodily injury.

Clean with steam or solvent.

Dry with compressed air.

Inspect the lifting brackets for cracks or damage.

Replace if necessary.

Inspect the capscrew threads for damage.

Replace if necessary.

Install the front bracket and four capscrews.

Install the rear bracket and four capscrews.

Tighten the capscrews.

• Install the retaining brace bracket. Refer to Procedure 001-081.