Table of Contents Current Check Current Check TOC  WARNING  Be sure the starter switch is in the OFF position to prevent electrical shock. Remove the…

Table of Contents Initial Check Initial Check TOC There are two possible heavy-duty battery connections: Battery terminal and clamp (1) Threaded battery terminal and nut…

Table of Contents Inspect Inspect TOC Use an inductive charging and cranking system analyzer to load-test the state of charge of maintenance-free batteries. If the…

Table of Contents Remove Install Adjust Remove TOC Insert a 3/8-inch breaker bar into the space provided on the tensioner. Rotate the tensioner away from…

Table of Contents Preparatory Remove Inspect for Reuse Disassembly Assembly Install Finishing Steps Preparatory TOC Remove the alternator drive belt. Refer to Procedure 013-005 in…

Table of Contents Initial Check Preparatory Remove   Pad Mount Spool Mount Clean and Inspect for Reuse Install   Pad Mount Spool Mount Finishing Steps…

Electrical Equipment Tool Number CC-2800 Refractometer The Fleetguard® refractometer is used to check the charge condition of a conventional battery. Tool Number ST-1293 Belt Tension…

Table of Contents Preparatory Steps Remove Inspect for Reuse Install Finishing Steps Preparatory Steps TOC  WARNING  Batteries can emit explosive gases. To reduce the possibility…

Table of Contents Initial Check Initial Check TOC Remove the air governor or air governor line from the air compressor. Remove the air intake line…

Table of Contents Initial Check Initial Check TOC  WARNING  Wear eye and face protection when using compressed air. Flying debris and dirt can cause personal…