Table of Contents Initial Check Initial Check TOC The cooling system must be designed to allow air to escape while filling the coolant system.  …

Table of Contents Remove   Single Seal Dual Seal Inspect for Reuse Install   Single Seal Dual Seal Remove TOC Single Seal Remove the thermostat…

Table of Contents Preparatory Steps Remove   Single Thermostat Dual Thermostat Inspect for Reuse Install   Single Thermostat Dual Thermostat Finishing Steps Preparatory Steps TOC…

Table of Contents Leak Test   In-Chassis Opening Temperature Test Preparatory Steps Remove Inspect for Reuse   Out-of-Chassis Opening Temperature Test Install Finishing Steps Leak…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Drain the coolant. Refer to Procedure 008-018. SMALL | MEDIUM | LARGE Next Remove the coolant valve retaining…

Table of Contents General Information Remove Install General Information TOC Refer to the Coolant Recommendations and Specification, Procedure 018-004 in the Operation and Maintenance Manual…

Table of Contents Remove Inspect for Reuse Install Adjust Remove TOC  CAUTION  The belt tensioner is spring-loaded and must be pivoted away from the drive…

Table of Contents Remove   Drives Alternator Clean and Inspect for Reuse   Drives Alternator Install   Drives Alternator Remove TOC Drives Alternator  CAUTION  The…

Cooling System Tool Number 3163524 Pulley Alignment Tool Used to align pulleys. Tool Number 3164350 Thermostat Seal Driver Used to install the thermostat seal in…

Table of Contents Inspect   Lubricating Oil Lubricating Oil Filter Inspect TOC Lubricating Oil An analysis of used oil can help diagnose internal engine damage…