Tools Required General purpose thread repair kits. These kits are available commercially. Caution: Wear safety glasses in order to avoid eye damage. Important: Refer to…
Legend (1) Threaded Oil Gallery Plug (2) Center Mount Turbocharger Oil Feed (3) Clean Oil to Engine (4) Oil Cooler Bypass Valve (5) To Oil…
The purpose of New Product Information is to highlight or indicate important product changes from the previous model year. Changes may include one or more…
Cylinder Block The engine block is made of cast iron and it has eight cylinders arranged in a V shape, with four cylinders in each…
After overhaul, the engine must be tested before it is installed in the vehicle. If a suitable test stand is not available, the following procedure…
1. Install the left accessory/lift bracket. Notice : Refer to Fastener Notice in Cautions and Notices. 2. Install the left accessory/lift bracket retaining bolts. Tighten…
1. Install the inner retainer (if equipped). 2. Install the fly wheel. 3. Install the outer retainer (if equipped). Notice : Refer to Fastener Notice…
Caution : Wear safety glasses in order to avoid eye damage. 1. Install the NEW clutch pilot bearing. 2. Measure to ensure the proper installation…
1. Install the oil fill tube grommet to the front cover. 2. Install the oil fill tube to the front cover. Notice : Refer to…
1. Install a new O-ring seal to the oil level indicator tube. Install the oil level indicator tube to the engine. Notice : Refer to…