1. Install the thermostat bypass connector. 2. Install the thermostat bypass hose and clamps. 3. Install the thermostat housing and gaskets. Notice : Refer to…

1. Apply the silicone sealant GMP/N 9985943, or equivalent to the turbo charger outlet. 2. Install the intake manifold gasket. 3. Slide the intake in…

1 . Apply the silicone sealant GMP/N 9985943, or equivalent to the turbo charger outlet. 2 . Install the EGR tower gasket on the round…

1. Install the intake manifold and gaskets. Notice: Refer to Fastener Notice in Cautions and Notices. 2. Install the intake manifold bolts/studs and fuel line…

Tools Required • J 41515 – A Glow Plug Socket • J 39083 Glow Plug Connector Tool 1. Install the crankshaft position sensor in the…

1. Install the turbocharger on the exhaust manifold and the studs. Notice : Refer to Fastener Notice in Cautions and Notices. 2. Install the nuts…

1. Install the new gasket to the oil pump drive. 2. Install the oil pump drive to the engine. • Index the drive with the…

Notice: Refer to Fastener Notice in Cautions And Notices. 1. Install the left exhaust manifold and the bolts. Tighten Tighten the bolts to 35 N-m…

1. Clean the sealing surfaces on the water pump plate and the block. 2. Install the water pump and the gasket to the water pump…

Tools Required J 29873 Nozzle Socket Important: Never rotate the engine with the starter, the starter location engine rotation fixture, or with the wrench from…