1. Disconnect both the battery negative cable from the batteries. Refer to Battery Cable in Engine Electrical. 2. Raise the vehicle and support with safety…

1. If servicing a 2 wheel drive vehicle, install the engine mount assembly. Notice: Refer to Fastener Notice in Cautions and Notices. 2. Install the…

Important: When performing this service procedure, do not lift the engine block by the crankshaft balancer. Damage to the crankshaft balancer, crankshaft pulleys, or the…

Notice: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected…

1. Install the drive belt idler pulley to the mounting bracket. Notice: Refer to Fastener Notice in Cautions and Notices. 2. Install the drive belt…

1. Remove the upper radiator shroud from the radiator. Refer to Fan Shroud Replacement (Upper) in Engine Cooling. 2. Remove the drive belt from the…

1. Install the drive belt tensioner assembly. Notice: Refer to Fastener Notice in Cautions and Notices. 2. Install the mounting bolt. Tighten Tighten the tensioner…

1. Remove the drive belt from the drive pulleys. Refer to Drive Belt Replacement (6.5L Drive Belt). 2. Remove the mounting bolt for the tensioner.…

Important: Refer to the Underhood Label for the proper drive belt routing graphic. 1. Install the beit over all the pulleys except the tensioner arm…

1. Install a 3/8 inch drive wrench on the tensioner arm and rotate the arm counterclockwise. 2. Remove the drive belt from the drive pulleys…